just pop in a jdm b20b n running boost . wats going to give ?



eg b20 @7psi
jdm b16 tranny ls 5th
Msd
and a lame driver

 

the sleeves if you aren't tuned perfectly, next I would say the rod bearings, and third the ringlands

 

sleeves before the rods or pistons?

 

b20 sleeves are alot different than all other b series sleeves. I've seen them go at 8psi

 

i got a hondata . will that protect the sleeves ?

 

a good tune and no detonation

 

If you have a good tuner it'll help. Tuning is everything. personally i just say go for it, and when the bottom end lets out just resleeve it and you'll have potential for whatever

 

wat kinda power dose this motor put out at 7 psi . will it make girls clothing fly away ?

 

in the right car it will, you'll have torue up the wazzo, girls love torque

 

The sleeves will go before anything else.
Yes, theyre the same sleeves as all b series engines...just 3mm thinner.
84mm vs 81mm

All you can do is get it tuned really well...and hope (or you could sleeve it and be done w/ it)
Just dont be surprised when it happens