Notices

rear view mirror always moving

Thread Tools
 
Old Jul 28, 2005 | 07:15 AM
  #1  
Randomher0's Avatar
Randomher0
Thread Starter
VSC EM1 13.1@106 RIP
 
Joined: Aug 2004
Posts: 135
Likes: 0
From: 909
Default rear view mirror always moving

with my stereo playing in my hatch the rear view mirror always rattles and you have to adjust everytime if you want to see out of it. i was thinking its because its connected to the roof rather than the windshield. does anyone have this problem that has their mirror connected to the windshield? would a boadway mirror work better with all the vibrations? thanks guys
Reply
Old Jul 28, 2005 | 10:52 AM
  #2  
chimchim's Avatar
chimchim
WRX cuz Honda won't wagon
 
Joined: Oct 2003
Posts: 1,725
Likes: 0
From: San Jose, CA
Default

A broadway mirror would make it heavier and tend to tilt downwards with the vibrations.

Try this trick: using a black zip tie and zip it around the mounting arm and the hinge of the mirror. Tighten it just enough to be a support, but not so tight that it pulls the mirror tilt up. I did this and I never have tilt down problems. Plus, the black zip tie is essentially invisible there.
Reply
Old Jul 28, 2005 | 11:06 AM
  #3  
CivicSiRacer's Avatar
CivicSiRacer
Honorary Moderator Alumni
 
Joined: Sep 1999
Posts: 8,735
Likes: 0
From: Someplace with cones=AUTO
Default

On my 00 Civic I purchased tennis grip tape at Sports Authority. Took off the mirror and dissembled it. On the joint/ball part I put some of the tape on the ball and put it back together.
__________________
Sponsored by: KAM Racing Sports, Falken Tires, Progress Technology, Brady's High Performance, Taggart Performance Engineering, Rotora Brakes
Autocross is: 90% driver, 5% car, & 5% CRAZY MOJO!
Autocross Help Page
Reply
Old Jul 28, 2005 | 11:06 AM
  #4  
delsol161's Avatar
delsol161
Senior Member
 
Joined: Jul 2005
Posts: 1,219
Likes: 0
From: Delaware, Ohio
Default

nice tip, i may give it a try too
Reply
Old Jul 28, 2005 | 01:03 PM
  #5  
95civiclx's Avatar
95civiclx
HMT b7
 
Joined: Mar 2005
Posts: 117
Likes: 0
From: Buffalo, NY
Default

mine is connected to the windshield...it used to rattle all the time. so i took it off. there is a metal clip inside that holds it down....i bent it so it was on tighter, put it back on, and its never rattled again.
Reply




All times are GMT -8. The time now is 08:29 PM.