what motors could you swap into a 01 ex coupe?
B series swaps into 01+ Civic's aren't too popular for a few reasons. Some of these are:
- It's not a direct swap like it was in 92-00 Civics
- Usually your motor will be much older than your car (Example: Friend with 99 Civic has a 95 B18C3 motor)
- The K series has eclipsed the B series, as far as tuner motors for new cars go. K series seemingly has more potential for power versus B.
Why don't you get a K20A2 head and a K24A2 block, and KPro, and have tons of fun.
- It's not a direct swap like it was in 92-00 Civics
- Usually your motor will be much older than your car (Example: Friend with 99 Civic has a 95 B18C3 motor)
- The K series has eclipsed the B series, as far as tuner motors for new cars go. K series seemingly has more potential for power versus B.
Why don't you get a K20A2 head and a K24A2 block, and KPro, and have tons of fun.
Originally Posted by TeHJuSTiN
96+ B18C1, B18C5, B16A2, B16B, B16A3 (maybe?)
2000-2001
__________________
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
[ASIANDOOOD.COM] [INSPIRE USA] [FACEBOOK] [ENDLESS 8]
F/S: JDM EG9 Parts - PM me for info
K20A2 head with K24A4 block might be more expensive than getting a complete engine.
But I saw a complete K20A2 head on eBay go for about $850 a couple of weeks ago. TSX block may be a little rarer, but my understanding is you can use an Accord K24 block if you do some work to it first.
A properly tuned BASIC N/A setup (this means I/H/E/IMG/KPro, maybe K2 cams if you're feeling rich) would net you about 220whp and around 180tq. That's very impressive torque.
Some also say that since the TSX block doesn't rev high enough it would be in your interest to destroke it to 2.2L to create a "K22" for high revvability with excellent torque
But I saw a complete K20A2 head on eBay go for about $850 a couple of weeks ago. TSX block may be a little rarer, but my understanding is you can use an Accord K24 block if you do some work to it first.
A properly tuned BASIC N/A setup (this means I/H/E/IMG/KPro, maybe K2 cams if you're feeling rich) would net you about 220whp and around 180tq. That's very impressive torque.
Some also say that since the TSX block doesn't rev high enough it would be in your interest to destroke it to 2.2L to create a "K22" for high revvability with excellent torque


