Some help please, on ek4 B16a2 civic??
#1
Some help please, on ek4 B16a2 civic??
I need some help with this boys and gals if ya can,
1. car takes a few turnovers to start... could this be dizzy? as ive put new plugs in
2. gearchange is a bit looser/more sloppy than any of my previoous civics
(b16a ones)Usually any jdm SiR civics/edm VTi civics have a real tight gear change?/?
3. car seems to be loosing some power? just doesnt seem to have that same bite as my previous ones?
Any ideas on above?
Also if the dizzy was acting up how would this effect overall performance?
Thanks
1. car takes a few turnovers to start... could this be dizzy? as ive put new plugs in
2. gearchange is a bit looser/more sloppy than any of my previoous civics
(b16a ones)Usually any jdm SiR civics/edm VTi civics have a real tight gear change?/?
3. car seems to be loosing some power? just doesnt seem to have that same bite as my previous ones?
Any ideas on above?
Also if the dizzy was acting up how would this effect overall performance?
Thanks
#3
Teal Hatch Cult Member
Join Date: Apr 2003
Location: Chicago Burbs
Posts: 547
Likes: 0
Received 0 Likes
on
0 Posts
dizzy=distributor.
if your coil is going it would do these things.
could also be low compression, dirty injectors, poor plug wires, in need of a valve adjustment and about twenty other things.
if your coil is going it would do these things.
could also be low compression, dirty injectors, poor plug wires, in need of a valve adjustment and about twenty other things.