Notices

So my CEL is on... but I ran into a problem

Thread Tools
 
Old 01-04-2005, 04:12 PM
  #1  
White[Pony]
For relaxing times...
Thread Starter
 
White[Pony]'s Avatar
 
Join Date: Mar 2002
Posts: 7,250
Likes: 0
Received 0 Likes on 0 Posts
Default So my CEL is on... but I ran into a problem

I did the whole, blue connector paper clip thingy, but when I turn to the ign position the only thing that flashes is my SRS light. It didn't do that before or after, so wtf is going on.

CEL came on after I ran into some intake + water problems. When we took out the spark plugs and rocked it back and forth a little bit, it sounded like something was rattling inside the block. so that sucks.
Old 01-06-2005, 02:50 PM
  #2  
Relic1
Teal Hatch Cult Member
 
Relic1's Avatar
 
Join Date: Apr 2003
Location: Chicago Burbs
Posts: 547
Likes: 0
Received 0 Likes on 0 Posts
Default

are you sure you got the two pin connector instead of the three pin connector?
you want the two pin(two wire locations in the blue plastic)




All times are GMT -8. The time now is 07:25 PM.