im about to do a b16A2 swap into a 95 civic dx. can i use the stock motor mounts, and axles. keep in mind, we have the whole 99 civic si. so would we use the 99 civic motor mounts or the 95 civic mounts? i heard the 99 civic si axles will work? also any other advise would be very appreciative.

 

the axles will work, but i think there are 2 motor mounts that will Not work

 

Kee p in mind that you will need a rear bracket from a 94-01 Integ, I don't think you can use the SI and you definatly can't use the your own.

 

You are telling him that he can use the stock D-series axles on his B-series swap?

Are you sure of this information that you are telling him?

I certainly do not agree.

 

he ment that you can use the b series axles from the 99si, but not the mounts

 

http://www.ardperformance.com/cgi-bi...c.pl?serial=14

this web site implies that i dont need to buy new motor mounts. is this correct? i need someone that has done this before or who really knows. thanks

 

ok you will need 94+ integra motor mounts, p30 obd1 ecu, obd1 GSR dizzy, obd1 injectors, 94+ integra rear tranny bracket, 99-00si axles or 94+ integra axles, obd1 wiring harness.

the EK mounts will not work.

 

He said he has the whole b16a2 swap including axles so i said that the axles would work, I didnt mean the d series axles

 

it would probably be easier to swap a B16A3 from a OBD1 Del Sol VTEC

 

ok, i have the 99 civic si axles, i plan on buying the obd1 to obd2b wiring harness conversion, i am going to use the 99 civic si ecu, and a motor mount kit. do i need anything else.