OBD1&2 issues
Thread Starter
THE TRUE O.G.
Joined: Sep 2004
Posts: 139
Likes: 0
From: QUEEN NYC
OBD1&2 issues
When I'm ready to put my 96-01 OBD2 B20 in, what engine accesories must be swapped for OBD1, I know the distributer, but I'm not sure about the alternator, fuel injectors, or starter. It's for a 92 Civic. Please help me on this.
Teal Hatch Cult Member
Joined: Apr 2003
Posts: 547
Likes: 0
From: Chicago Burbs
it depends on which engine harness you are planning on using.
if you're using the '92 harness, then you either need to change the plugs on the alt, distributor and injectors or swap them for OBD1 units.
I used the OBD2 engine harness that came with my swap, switched around a few wires and pluged it into my '92 chassis harness at the shock towers and everything works perfectly.
if you're using the '92 harness, then you either need to change the plugs on the alt, distributor and injectors or swap them for OBD1 units.
I used the OBD2 engine harness that came with my swap, switched around a few wires and pluged it into my '92 chassis harness at the shock towers and everything works perfectly.