i have a D15b8 in my 94 civic. It's stock. I am getting a d16z6 for my car. What all do i have to switch to make the engine fit? I know i have to change the ecu, but what else needs to be switched for this to work. Please list all the parts you know will have to be changed. Will the tranny have to be switched?

 

nothing, ecu keep trany

 

ecu and driver's side motor mount. You'll also have to add a few wires for vtec.

 

how much are you paying for the motor?

 

I am trying to get rid of my 00 d16y8 with 40K miles...600 for tranny and motor

 

i am paying $700 for the engine and ecu. 51k on them.

 

thats not bad as long as the motor hasn't been abused. that what i paid for my 2000 Y8 with 12k.
make sure you get the wiring harness with that, it makes things easier :thumbup:

 

thats a easy swap i have done it b 4. ull need a vtec ecu a wire harness would be very helpful probally a distributer if the motor your gettin doesnt have one a driver side motor mount from a 92-95 ex and that should b it. your gonna have 2 run new wires from the ecu 2 the vtec switch, vtec oil pressure sending unit and the o2 sensor. getting a harness that plugs into the ecu would be a big help also.