Bolt Mesurements
04-16-2004, 01:12 PM
#11
Black Pearl
Join Date: Oct 2002
Location: Wisconsin
Posts: 2,517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 92eg6
does the lower control arm bolt that the sway bar link goes into the same bolt.
i know its 2mm shorter but NOONE has a 18 bolt only 16
i know its 2mm shorter but NOONE has a 18 bolt only 16
In long, you will have to drill two holes in your subframe if they are not already there.
I don't know much about this model, hopefully someone has some more knowledge on this. You may want to try a search. I recall this being discussed a while ago.
04-16-2004, 07:07 PM
#12
99 CG3 Owner
Thread Starter
Join Date: Apr 2004
Location: Baltimore
Posts: 327
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Hondaman
In short, no.
In long, you will have to drill two holes in your subframe if they are not already there.
I don't know much about this model, hopefully someone has some more knowledge on this. You may want to try a search. I recall this being discussed a while ago.
In long, you will have to drill two holes in your subframe if they are not already there.
I don't know much about this model, hopefully someone has some more knowledge on this. You may want to try a search. I recall this being discussed a while ago.
04-16-2004, 07:58 PM
#13
Black Pearl
Join Date: Oct 2002
Location: Wisconsin
Posts: 2,517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by 92eg6
why do you have to drill a hole for stock
04-16-2004, 09:23 PM
#14
Push to shock!
Join Date: Sep 2002
Location: Palo Alto, CA
Posts: 4,583
Likes: 0
Received 0 Likes
on
0 Posts
04-17-2004, 08:13 AM
#15
it's my D in a B
yeah, some cars have the lower hole, some dont. If not, just drill a 3/8" or 5/16" hole... not a big deal.
Take a quick look under the car and see if its there. It should look like the pic of the subframe I posted in the other swaybar thread.
:edit:This site is a how-to on the ITR bar, but it should be helpful... the only step you don't need to worry about is #7 http://geocities.com/bretq/swaybar_install.html
Take a quick look under the car and see if its there. It should look like the pic of the subframe I posted in the other swaybar thread.
:edit:This site is a how-to on the ITR bar, but it should be helpful... the only step you don't need to worry about is #7 http://geocities.com/bretq/swaybar_install.html
Thread
Thread Starter
Forum
Replies
Last Post
inspyral
Engine Swaps, Tech & Tuning
7
02-04-2003 11:59 AM
dnt94civic
92+ Civic/EL & Del Sol
4
09-21-2002 08:36 PM