Hey guys, i have a Baer brake kit for front and rear on my 97 EK hatch. Ive heard that it is worthwhile to upgrade the master cylinder and proportioning valve to go with the kit. The stock DX one is 13/16ths i believe and ive HEARD that an EX is 15/16ths. My question is what year/models are compatible for my car? Do i need one with 4 wheel discs? What proportioning vavle should i get and off of what car? Thanks a lot guys!

 

i wish i knew but there is a MC for an older civic (from early 90's or so) thats 1 inch MC.
also ITR is a 1 inch MC

 

IIRC Doood knows which one that was. I think it was 91-ish sedan with ABS or some such.

 

On my 92 (EG) Civic, I upgraded my MC from the 13/16 (DX) to the 15/16 off a 91 Civic sedan EX. The MC bolted on to the stock booster.

Only that MC will bolt on to the stock booster. If I went with the Integra 15/16 (RS) I would need to change the booster as well.

The mod bolts directly on my generation...Im not sure if it is a straight bolt on for the 96+ (EK) Civic boosters.