Where do I find the wires on my 92 for the VTEC ? I took some shots of the bay to show you guys . some people say all 92 come pre wired some say no . let me know thanks !

 

anyone ? engine bay is dirty but thats coming out soon

 

the wire will run from the ECU to one of the plugs in the image attached. The best way to find out is to figure out which ECU pin position is supposed to be for VTEC and see if there's a wire going into the position. If there is, you're wired for VTEC.

hih

 

Yeah WCS is right they run into the plug. Trust me its pre-wired for vtec all 92 civics are wired for it. h:

 

Yeah I know you told me that but needed to be 110% sure . I wanna have everything I need when Im ready to do the swap !
Also I wanted to ask is there a color pattern I should be looking for ? Like white/blue yellow/black ext/ext ? Thanks ! Or just look to see if there are three wires leading to nothing ?

 

:dunno: on the color. Just look at your ECU harness itself. If there's a wire in the VTEC spot, you have wiring for VTEC.

 

Dude I am 110% sure it pre-wired. :fawk: Ok here are the colors Blue,Blue/yellow strip,orange/blue stripe. h:

 

Well I love you too ! :fawk:

 

Ok now go check and see if its wired for vtec.

 

It's 92 miles away ! Impicking up the car next weekend I will let you know then ! But in the meantime like I said b4 I have a b16block , and a complete 92 ls motor . What do you think I should do . Get a vtec head for the b16 since it was made for vtec ? Or just install the ls motor and call it a day ? Im looking for the most hp here . basic mods will go to either engine so I want whatever will give me the most . And I don't think I will be doing an ls vtec due to cash . Thanks guys let me know what you think is best !