Auto tranny problems !!!
Thread Starter
Seni
Joined: Aug 2003
Posts: 3,401
Likes: 0
From: N.Y. Queens
Auto tranny problems !!!
Ok here we go ! Me and my cusin changed the tranny on my car today . It looks like we did everything right . But the car will not move at all ! When you change gears the motor sounds like it goes into gear and the MPH even go up if you gas it . Can someone help me out on this topic ? Im really pissed me and my cusin worked on the tranny all ****ing day when it hit night time we finished started it up and we upset . Well thanks guys !!!!!
Senior Member
Joined: Jun 2003
Posts: 4,703
Likes: 0
From: Eastern MA
The difference in models shouldn't be it, all D series tranny's are interchangable. I think it's something wrong with the diff. since it says the mph, that means the transmission is moving, the gears I mean, so it must be something between the axle and the transmission, cause im almost positive the transmission is fine...
Thread Starter
Seni
Joined: Aug 2003
Posts: 3,401
Likes: 0
From: N.Y. Queens
I did'nt understand that ! Can you explain a little better thanks man ! The only reason I ask about the axels is because someone told me I might have 32mm and I need 35mm or something like that .
Thread Starter
Seni
Joined: Aug 2003
Posts: 3,401
Likes: 0
From: N.Y. Queens
Ok problem fixed YAAAEEEHHHHH!!!!!!!!!!!
Ok we spent all day working on this tranny the first day . Nightfall came and we had no light . We had to use this big light pole thing to see . dumb thing to do ! Well we hooked everything back up And we thought everything was fine ! WRONG . When I was hooking up the pass side axel I had to hold the light with one hand and the axel with the other I lined up the axel and put down the light as I went to push the axel in is got out of line and it sounded like it went into the tranny . that was not the case it felt like it clipped in but it actually did'nt it was hanging down and not in the tranny lol stupid me . I went back today 2 days later and took a look . I felt like kicking myself in the a*s . Well a leason learned !
Ok we spent all day working on this tranny the first day . Nightfall came and we had no light . We had to use this big light pole thing to see . dumb thing to do ! Well we hooked everything back up And we thought everything was fine ! WRONG . When I was hooking up the pass side axel I had to hold the light with one hand and the axel with the other I lined up the axel and put down the light as I went to push the axel in is got out of line and it sounded like it went into the tranny . that was not the case it felt like it clipped in but it actually did'nt it was hanging down and not in the tranny lol stupid me . I went back today 2 days later and took a look . I felt like kicking myself in the a*s . Well a leason learned !
