Here's my 03 EX Coupe 4 cyl. with a 1.5" drop from Sprint Springs. I used the full JUST release Camber kits, for front and rear from SPC. Allignment is PERFECT with the drop and the Camber kit.
Rear drop is less than 1 finger gap. Front is a one finger gap. Only pic that came out was of rear, looks like there' more room than there is. No rubbing issues with 7.5" wide 17" wheel, and 215 tire width.
I'm getting 19" OZ Superleggerras w/i 2 weeks with Falken tires for a few of my first autocross runs. I have no idea what to expect - never driven any car for time or anyhting before, let alone autocross. I htink I'm up there when it comes to classes b/c of the drop, larger wheels and tires, and other suspension mods (the strut bar from neuspeed.)
Eibach JUST releaed springs for the 4 cyl. coupes - but you won't find them in stock anywhere - V6 springs have been out for a bit - a month or two - from H&R and Eibach - they aren't too hard to find.
THe SPC Camber kit is Expensive, but MUCH needed. I have a 'connection' that I can share with people to get everything for $265 shipped for andy 03 Accord.
If you're going to pay labor to have the Springs installed, you may as well get the camber kit and not destroy your tires with uneven wear.
And yes, the Ferrari Symbols and Mugen stuff is off - the other stickers are staying though - all ones from actual Mods I have. I'm contemplating on the rock chip shield. Tip looks good, and a few other Honda peeps in the area thoguht I got an exhaust for it already, they couldn't even tell it was just a tip. APEXi DOES have exhausts for ALL 03 Accords, BTW. And Injen JUST released a CAI for the 4 cyl. 03 Accords. DC Sports will have their CAI, headers and exhaust out mid June, and VIS has a Carbon Fiber hood out late-June for the 03 Accords.
Can you tell I'm planning, a LOT? My mod plans:
AmsOil ByPass filter - Installed next week
INJEN 4 cyl. CAI - Mid-June
DC Sports Headers - Late-June
APEXi or DC Sports Exhaust - Late-June
VIS Carbon fiber hood - NO HOOD PINS! - Early-July
BTW - this is the pacge to get the low-down on new 03 Accord parts:
NOPI Link
That'll list EVERYTHING out there - minus a few things from SPC, and a few mis-listings of things for only the 6th Gens.
And now - the pix of my car lowered:
BTW - the ride with the Sprint Springs is actually BETTER over light bumps - almost unnoticable - and the larger bumps are felt more - as to be expected. With the Mud Gaurds I have on it, I only have about 1.5-2" clearance form the ground in the front though - so I have to be careful