From my experience you can run wheel spacers as long as you have 7-8 full turns of your lugs. For inspection purposes you will not pass though. So just show up without them for a little while.

But the wheel lip WILL rub the rear upper control arm and that can be fixed just by filing down the rear UCA about 1-2mm. I just used a 3mm wheel spacer in the rear I got from my sponsor He can mail them out to you: KAM Specialties 610-777-9702 and ask for Bryner and tell him you talked to Mike Louie.

PLus the 215/45x16" Azenis are too wide. I already had them on my 16x7.5" Kosei K1s and they rubbed like crazy.