View Single Post
Old Apr 27, 2003 | 05:02 PM
  #6  
avijiggybear's Avatar
avijiggybear
Senior Member
 
Joined: Jun 2002
Posts: 248
Likes: 0
From: Houston
Default

first you have to take off the panel underneath your steering wheel, then the steering wheel cover. you next locate the wire harness that connects the foglight loom to the end of the headlight stick. u unplug both ends of it. u locate the green/red wire and take it out. there are two little tabs holding it in, u just gotta use a really small screwdriver to push it down and it will come out really easily.
then u locate and take out the wire coming out of the loom from the foglights(it should still be connected to the harness, its the only wire still connected after unplugging both ends). u put the green/red wire where the loom wire was, and vice versa, plug everything back together. be sure to replace the taillight 7.5amp fuse w/a 10amp fuse. ppl have known to burn out the 7.5. after that you're set to go!
Reply