Very easy to do....
First thing .. if you look in your wheel well .. if you follow the lining up where close to where the bumper meets the side .. you should see a recess for I think a 10mm nut, you will need to remove these from both sides.
You will need to remove the grill ... (between your head lights).
If you take out your bumper lights (turn signals), you will see two bolts behind there. There are a total of 4 (2 on each side) take those out ...
You might also want to remove your side lights ...
That should be it ...
NOTE: You might want to check the splash guard underneeth, you might have to remove that first as well.
I am pretty sure that is it, you pull up on the bumper and it should come right off.
I have lots of pics of this at home, if you are patient I can get these up tomorrow, unless the directions are okay.