Originally posted by ferrealb16
but there is a difference, right? and since there is a difference, formed elbows are better. thank your for illustrating my point.
True there is a difference, that's all I'll say.
is it a bend, or is the pipe set at a 15* angle?
The pipe is set at a 15* bend at the head on some headers, and bent to about 15* on others.
when i registered to this board, i never read anything that said people can only speak about streetable engines.
Well that would be our fault then, wouldn't it. Here's a little hint then: If someone is talking about a theorhetical build, anything goes, if they're talking about a race engine, anything goes. For topics that don't fit those two, we normally double check on the intended uses before making suggestions.
and if you think i was belittling you, its your fault. you know what youre talking about and i would like to see your car make a run. but all in all, i can take a crx with its sohc vtec engine and make it run low 14's without ever putting an aftermarket part on the car. building sik qik cars is what i do.
Personally I prefer sleepers, and BTW, CRX's didn't come with SOHC VTEC engines stock
