I did one on my sol, but it's all the same. You're right, but I'll list everything to make sure I don't forget anything.
Tranny
motor mounts
clutch and brake pedal
clutch master cylinder
clutch slave cylinder
hydraulic lines
starter
the axles SHOULD be the same
Flywheel
clutch
shift linkage
you'll need to modify the plate to attach the shifter under the car
depending on the car, the rear motor mount
shift boot and ring for inside the car
a little wire jumping to get the key to come out of the ignition
5spd ecu (if you don't want it throwing a code all the time)
and that should about sum it up...