View Single Post
Old May 14, 2009 | 11:23 PM
  #4  
AZAccordV6's Avatar
AZAccordV6
Riding Nice in T-Town
 
Joined: May 2009
Posts: 2
Likes: 0
From: Tucson
Default

There was a good post I know this is honda, I had an sc400 with condensation and what they said to do was put the oven on warm and place the headlamps in there to warm up the glue and then slowly work the pieces apart with a putty knife. Hope that helps. Heat guns can do some damage so I err on the side of caution and besides if the ovens to hot the damage is consistant :-P
Reply