Originally Posted by
xxxxxxxx
My problem turned out to be the hood pin switch...it's located right in the hood latch...mine was covered with grease, dirt etc...I basically sprayed a lot of WD40 to clean it and then used my compressor to blow away all the freed up dirt...the switch is actually bluish in color...if you can, use a small scewdriver and gently clean the metal contact strip...it's kind of hard to see...but its there.
Let me know how you make out.
Good luck.
C
Just reviewed this reply, walked out into my garage and found the little blue switch then blasted it with carb cleaner. Right on the money, it worked! Thanks.