Having been confused by a idle problem after checking everything is ok (sensors and vacuum leads) i checked skunk 2's website only to find that with my cams, im going to have to reduce fueling by 20-30% up to 1500rpm to have a smooth idle.

I now need a good basemap (standard or similar to my setup)

Could anyone on here be kind enough to give me a copy of theirs?


Heres my setup-

B16a2 block
B16b (ek9) pistons
B16a2 head (skimmed by 30 thou)
Skunk 2 stage 2 cams
compression ratio 12.0.1
B16a2 intake manifold with STD 58mm T/B
B18c ITR manifold

At the moment im running standard timing with no retard or advance, i still need to 'degree' the cams.

Dont mind what software it is as i will just download the program, however i would prefer crome.

Thanks for any help, ste