Today the shop I have the car told me that there is oil in all 4 cylinders. This is because of one of two reasons...

1. The piston rings could have been installed upside down, not likely since the guy who built my block, has built many before, and there has been no problems previously. But like humans are... Mistakes could have occurred.

2. The built head I bought. After buying the head, then the guy tells me there is more to the head that what I was told previously. I was told this head was the first head the guy has ever done. He got online as read a write up on how to build a head.

He first took the head and heated it up in an oven at 300* for 15-20 mins. He also froze the valve springs. He then removed the head and then began to install parts, such as the valve seals and guides. This also means that the guides and seals were not installed properly...