Originally Posted by
stereo
after you pull the white plastic cover off the back (without breaking the clips) you will notice all the A/T bulbs are on the other side all the other bulbs are twist off and can be changed in the back without takeing it appart but the P R N D 2 1 bulbs are installed on the face side of the circut board and not the back PCB side , you don't have to pull the needles but the gauges have to be pulled off the board to get to the bulbs ...
the PRND as well as the other 7 or whatever bulbs that light the needles , odo, and the face are all on the same side. I had to replace the ODO bulb... and from the shock of removing it... the d4 light went out.... i switched it with the d1 light and it worked.... and i didn't need to remove any cover or board off of the cluster.
do you want me to take a picture of it in the morning?
edit: he has a 2000. i hope your not thinking of the older gauges.