Originally Posted by
ADRONICUS
I have this same problem and was looking for a quick fix, but had not given it much thought. So how exactly did you do this? It sounds like you affixed it to the inside of the shift boot, but I could be wrong and so I am asking for clarification. Thanks!!!
Well with the center console "loose," I just wrapped a rubber band around the shift lever several times and slid it down pretty far. Then I reached underneath, flipped the top portion of the boot inside out and worked the band onto that. A zip tie would probably be easier though.
Hard to explain, but if your looking at the boot I'm sure you'll see what I mean.
Originally Posted by
94civicEX
I wrapped electrical tape around the shifter just below the nut for the shift knob, you have to do it so it's just a little bigger than the hole on the top of the boot, then you pull it up and over it
.
This is probably easier if you don't have the console removed already.