Ok all systems have an old scs wire that all go to pin 9 of the data link connector aka dlc.If you use the view attached ,this is looking at the front side of the dlc, jump pin 9(the circled one)to ground ant turn the key on.It will blink any dtc in any system(abs,ecm,tcm).

Now to count the blinks if you have 3 long blinks and 2 short blinks your code is a 32 get it.

After reading the code un jump the dlc to ground and get back with me on the code.

Ps.only jump pin 9 any other will blow fuses or control units.