ya take off the door panel two screws under the handel one screw in the pocket.then ther are two bolts holding the window on the windor regulater you can get to then trew 2 holes your window has to be in the rite spot if you have to plug back in the switch and play with the window till you see them.you also have to take out the metel(rear one) run one bolt then it slides down off the ruber window run then you can take out the small glass some hiden bolts under the seal.and pull the window out.the hardest part is geting the metel run back in to place i lube it with spray silicone and slide it back up the ruber run.