I masked off the quater panels, masked off the clutch and brake reservoir, the wiper motor shroud or whatever you want to call it, pulled the wires out of the bay and under the frame, masked off my vacuum manifold, and steering rack. Then I sanded with 380 wet/dry paper, put down some 98 cent primer in a can, sanded with 400, primered again, sanded with 600, then two coats of Duplicolor flat black.

I have to re-sand and paint a few areas that got fucked up when I put the motor back in.

And I'm using a T3TO4E .60/.63 60 trim.