Originally Posted by
dleccord
reading from the first thread, he has 2 dvc 2ohms. he can wire it down to .5, 2, or 8ohms, so i dont know what you are talking about at 1ohm.
get your shit right. if you have never had any experience with these subs then dont talk at all. they will take 1000+ each, yes each 10, provided that you set the gains accordingly, sending unclipped signals. sending each sub 500watts will not do them any justice. seriously.
that sub can take any wattage you put to it, but putting the proper amount to the sub will keep you in waranty and a safe operating range without worry of blowing it. putting a 1000 rms on that sub, yes it can handle it, no it won't handle it for long because where does the amp start putting 1000rms to the sub. when the volume is on 1 out of 30, 10 out of 30. 30 out of 30? if it puts out 1000rms to one sub when the volume one the hu is at 10, then it will keep pumping out more and more the louder you turn it up, once you reach the limit of the sub it will go