Doode, you are going to need the whole front clip. You need to strip your car, drill out the welds in the firewall, take that off, put in the JDM one and reweld it. Put in the dash, steering rack, clutch/brake/gas cables and most of the wiring has to be redone. You're looking at about $1600 worth of parts here and that's if you do all of it yourself (welding labor + ~$300). Do not get discouraged though, just time consuming that's all. I might do that myself on the EM1 when I fix it up, unless I sell it. Here's the link, read ALL of it and see for yourself. I bet you're going to be so excited after you're done reading.

http://www.honda-tech.com/zerothread?id=1435957&page=1

Good Luck!!!