Originally Posted by arun158
i hooked up the wires from underneath the car starting from where the donut is, because there was already a hole and went across, voiding exhaust and all. So how can i solve my remote wire problem without opening the HU.
The best way is to hook the remote wire to the HU. There are other ways though. You can hook the remote wire up to any other source that turns on when the ignition is on. So when you turn the key, the amp turns on regardless of if the HU is on.
OR
You can hook the remote wire up to a constant power, like right up to the battery. Then put a switch to the wire. So the only way for you to turn the amp on is by flipping a switch. BUT, if you forget to flip the switch off when you leave the car...the amp will continue to run.