View Single Post
Old Apr 8, 2006 | 05:23 AM
  #15  
b18c1_hatch's Avatar
b18c1_hatch
Senior Member
 
Joined: Jun 2004
Posts: 667
Likes: 0
From: Maryland
Default

Originally Posted by RicoD
its not really that hmotors is bad (cuz they're not) but basically, its better to check over things like the clutch and such before you put the engine in. its so much easier to change out that stuff while the engine is out.
what he said.

I made that mistake. i bought a 97 gsr with 125,xxx miles on it full swap. From a buddy not h motors. I just swapped it in my car without replacing anything. 3 months later. the Pressure plate went bad and the timing belt streched so much that it caused me to bent a valve in the head because the cam gears where 180 degrees off. So i learned my lessing i would replace it while its out of the car.
Reply