I have no power steering and I dont care much for the handling any more I just want a straight line car. The ATTS is not a LSD. A LSD is in the transmission, the ATTS is outside the transmission but works like a LSD but is computer controlled a LSD is a mechanical device. I just wonder if you take the ATTS unti down the half shaft support bearing and half shaft replace that space and the bearing support bolts up to the to threaded holes the ATTS bolts. I just dont know if the half shaft plines will fit into the Sh trans because if it has an actual LSD in the tranny the splines could be differant. You shouldnt need an adapter plate to bolt a base trans to a Sh H22 because the blocks are the same. Although you might need a base trans because of the splines. If the half shaft fits into a Sh trans I just dont want it to be a one wheel wonder. But if the ATTS is outside the trans then it must have power going to it from the trans to power it so I dont think that it would be a one wheel wonder.