i have a 95 h22a1 that has eagle h beam rods with pistons and darten sleeves.. the crank and block have been balanced, and it runs at 12 1/2:1 compression. i do have head work such as port and polish springs lifters valve job etc.. but i run stock cams, but soon will be running stage 3 skunk 2 cams and cam gears.. with it dyno tuned it makes roughly 300hp, now im looken to put on a t60 turbo setup, full setup, but i still half to drive the car once inawhile to work and on the streets and i just was wondering if with a setup like that if it would still be relaible...