I don't know if this will help, but here is a list of where all the wires go. I got it from Vancouver Prelude Club.
(ORIGINAL)
Harness H
1. Yellow -- power
2. Pink -- speedometer
3. Splice the red/green wire from under the hood near the fuse box and run to pin -- power
4. Red/Black -- dimmer wire
5. Black -- ground
6. Orange
7. No wire
8. Light green (you need to splice the wire from the dash clock harness & run it to the pin) -- trip mileage memory
9. No wire
10. No wire
Harness J
1. No wire
2. No wire
3. No wire
4. Green/yellow -- right blinker
5. Red/blue -- high beam
Harness M
1. Blue/silver spots -- tachometer
2. Black -- ground
3. Red/yellow -- high beam
4. Green/blue -- left blinker
5. Blue -- SRS
(UPDATED)
Harness H
1. Yellow -- power
2. Pink -- speedometer
3. Yellow -- Power
4. Red/Black -- dimmer wire
5. Black -- ground
6. Orange
7. No wire
8. Light green (you need to splice the wire from the dash clock harness & run it to the pin) -- trip mileage memory
9. Red/Yellow
10. No wire
Harness J
1. No wire
2. No wire
3. No wire
4. Green/yellow -- right blinker
5. Red/blue -- high beam
Harness M
1. Blue/silver spots -- tachometer
2. Black -- ground
3. Red/yellow -- high beam
4. Green -- left blinker
5. Blue -- SRS