ok i have a 92 accord with a 2.2 l going down the road and died like it ran out of gas timing belt was bad changed belt made sure everything was timed double and triple checked still no start checked spark and have spark
also have fuel have not done fuel pressure test yet but plugs get wet
did compression check and found have no compression none zero nada
there is air coming out of cylinders but not enough to resigter on compression guage i was thinking bent valve but when cranking it valve train seems to be fine besides if it bent valves not every cylinder would be affected right? i have no clue where to look i have read about the cylinder
position sensor that is intergrated in to the distributor could that be it?

any help would be appreciated
thanks
brad