Originally Posted by parkerfly
I used the CRX compensator arms and integra everything else. Looking closer at it the drivers side compensator arm does look a little longer and have slightly different angles... does that sound right? If it was a little short that would help.
Any ideas? I could order integra compensator arms but would hate to do that and find out they're exactly the same.
Thanks
if you find the compensator arms somewhere(try honda) cross reference the part number to determine if they are identical or not.
but if you think about it, if one of them is different then the other then you have an inconsistancy that is probably causing your camber problem right there in the compensator arms. generally the person that attempts to align it will check to make sure the bolts and ball joints and bushings are intact. i could see how different size and shape compensator arms could be missed, and how it could cause your problem.
Originally Posted by jaje
the 90-91 crx si had rear discs (i think the 90-91 civic si and ex sedan also had rear discs too)
i'm not sure about the sedans but i know the civic si's didn't have disks in the rear.