This is my first real DIY, so bear with me and if you need better pictures or instruction, feel free to PM me at anytime. This conversion was done with the kit I purchased from Xenith Xenons on this site. Great guy and great kit.

I purchased the 9006 6000k kit for my Integra and these are the steps I used to install it.

Tools needed:
10mm socket (optional)

Procedure:

1. Make sure that you have all the necessary components in the conversion box. They include:

2 HID 35W Bulbs
2 Ballasts with ignitor and polarity adjuster integrated
2 Ballast pads (useless)
Zip Ties
Assorted Screws, bolts, and washers (useless)
Stators (useless)



2. Chuck the instruction "pamphlet" right in the circular file and don't ever refer to it. Firstly, it refers to the hood as a bonnet and secondly, it tells you to remove your headlight assembly and start drilling away with a 22mm hole cutter. :nono:



3. Remove your stock (or xenon piece of shit) light bulbs and leave the harnesses hanging. If you notice, the ballast has a black and a red wire with a prongy thingy at the end.



4. They are making this too easy....Notice the black and red wires leading to the factory bulb harness.



5. I wonder what you do next? :thinking: My guess was to put the prongy thingys into the holes on the factory harness matching up the color wires. Make sure you jam them in there tightly, so that the rubber is insulating the prong and the harness.



Continued (internal picture hosting restrictions are a drag)...