Originally Posted by e3NiNe
You can do it, but your sub would try to project the entire decible range.
on the amp you have: (all set a full mode, not just mono)
- front right
+ front right
- front left
+ front left
- rear right
+ rear right
- rear left
+ rear left
Wire the front speakers normally, then bridge the amp to the sub. That should get you power, but since the amp is on a stereo mode for the front speakers, the sub might not get as low as you'd like it.
:
Ch 1 and 2 has its own filter set on high pass, and Ch 3 and 4 has the filter set on low pass. So it feeds the according speakers just fine. I am just having trouble with the rear speakers that should be powered by the headunit.