Right now I have the front speakers using Ch 1 and Ch 2. When I tried it last night, I had my subwoofer out. So Ch 3 and Ch 4 was empty on the amp.

I took my deck out and wired the 4 rear speaker wires on the harness. Then I went into the back and wired up my rear speakers. I turned it on, and nothing played out the rear speakers. The fronts fade and balance fine, but when pushed to the rear, no sound at all. The speakers are brand new so they should work, but I am going to hook them up to the amp to make sure they are in working order.

One thing I did notice that was weird is that when I did have my sub in Ch 3 and Ch 4 (the rear channels), it would not fade to the back also. When I fade to the back on the deck, no sound would come out of the sub also. I have the RCA plugged into the F and R preouts. Sub (non-fade) preout is empty.

Could there be something wrong with the RCA wires not giving a signal? I dont have an OHM reader or any multimeters to use.

Thanks for the help :happysad: