the bolts are on the back side of the caliper, there are 2, you should be ablt to tell they are the only ones holding it on. To bleed the brakes you need a second person . While the car is off and you have finished putting them bake together. have them pump the brakes a few time, then hold it down. While they are doin that, you need to open the bleeder. It is on the caliper with a little rubber boot on it. I think it is 10mm. Do this until there is no air comin out. when they are holdin the brake down is when you want to close the bleeder while a steady stream of fluid comes out. You can capture and reuse it if it is clean. Repeat for all 4 wheels