Originally Posted by pnthr30
This would be for working on a Teg, so what kind of torque range do I really need/want?
Thanks again for your help guys, and sorry for the "dumb" questions....
you'll need at least 2 if you want to cover engine as well as suspension parts.
1 low range say 10-40ft/lb for engine
and one high range say 30-200ft/lb for suspension parts and wheels of course.
I recommend the griots garage one. life time free calibration. you just need to mail it in. they are also accurate to + - 1ft/lb at any part of the range.
most torque wrenches (not the balla ones) are within 5ft/lbs at the middle of their range and can be off as much as 10 ft/lbs at the extreme end of their range.