On the clutch disk it says this side flywheel and it was put on correctly, The cable IS on right and has been adjusted many times. My car is an 89 DX, the tranny I "WANTED" to use is a 91 Si. I was told to get a clutch kit for the 91 and I would be straight, this is NOT TRUE. The clutch dick and pressure plate are larger for the Si (1.6L engine) Now I was going to get a lightweight flywheel now. It says it fits the 1.5/1.6. Then why are the stock flywheels have different part numbers?

This is what it breaks down too. Can I bolt up my 91 Si tranny to my DX engine? If so I think I would have to use a clutch kit and fly wheel for my 89 DX engine.