Originally Posted by lkailburn
^^^ the dremel discs state that they are ideal for cutting through frozen bolts and nuts.
-i called up home depot to see if they have any bigger cutting discs.. only have 1.25" diameter disks. the ones i have are just under 1".. but still, .125" is not a big enough difference.
-i found our reciprocating saw(sawzall) but the car wasn't high enough to get a good angle on the nut. the blade would hit the drum assembly
-so i jacked up each side one at a time and raised up the jack stands
-but now i'm worried that the car has rolled back a bit because after the car was set back down on the jack stand i was shaking the car to make sure it was safe but i could hear/feel the left jack stand rocking a bit because the side walk is slightly sloped. now i'm worried about my own safety working under the car. and i can't bring it all back down and move the car forward cuz of the broken bolt!
i'm so stressed
are your wheels chocked (or however you spell that :thinking: )? Safety first, man... make sure everything is secure. If your not sure, lower it back down, jack it back up and chock the front wheels to make sure it doesn't roll. What kinda jack are you using?