^^^ the dremel discs state that they are ideal for cutting through frozen bolts and nuts.
-i called up home depot to see if they have any bigger cutting discs.. only have 1.25" diameter disks. the ones i have are just under 1".. but still, .125" is not a big enough difference.
-i found our reciprocating saw(sawzall) but the car wasn't high enough to get a good angle on the nut. the blade would hit the drum assembly
-so i jacked up each side one at a time and raised up the jack stands

-but now i'm worried that the car has rolled back a bit because after the car was set back down on the jack stand i was shaking the car to make sure it was safe but i could hear/feel the left jack stand rocking a bit because the side walk is slightly sloped. now i'm worried about my own safety working under the car. and i can't bring it all back down and move the car forward cuz of the broken bolt!

i'm so stressed