I need help installing my springs. I am replacing my cheap coilovers with H&R springs. My question is, do I need a spring compressor to install my new springs? I did not need a compressor to unistall my coilover/kyb agx assembly, but now that I am putting lowering springs on, I could not get the assembly to fit back in. So if I use a spring compressor to compress the spring to make it the same size as the coilover, i would easily be able to fit it in and bolt it in. Is that correct...or is there an easier way to fit the bigger springs in without going out and getting a compressor.....I have never needed to use a spring compressor before, but now I am stuck with these springs! thanks