HERE IT IS! (SORRY 56K users)
Tools you will need
-Allen Key's 5mm (have two sets) you may need it
-Car jack
-(2) jack stand
- 5 inch pipe
- 8/16 inch rench
- socket rench with 12mm & 14mm socket
- socket extention
- 1 can of WD40
- and light! at least 3 hours of it
- 3 pair of laytex gloves (they rip)
- of couse the CL-S sway bar bushing & brakets

Which bar is which? you cant tell the difference huh...
The brakets are Bigger when you compair the two. you will see when you do it.






Some tools you'll need


Remove these nuts first
driver side eazy

pass. side was a bitc* the Allen key bent and the hole was stripped took me 1.5 to get it off


LOOK what happen twissted the allen key need a new one


Bushing and brakets next


its now removed


This is where the PIPE comes into play helps a hella whole lot




Just reverse the process to put the NEW bar on


for more pix
http://www.imagestation.com/album/?id=4291522939