I know nothing about how honda colors there wires but here is my set up. My rear right(which is blow) has three wires. One that is red with a yellow stripe but has a gray band, another that is red with a yellow stripe but has a blue band and the third wire is brown with a white stripe.
The left side has three wires also. One blue with a yellow stripe with a gray band, another blue with a yellow stripe but with a brown band and the third is all gray.
Now the way it is hooked up is that on the left side both the blue/yellow/gray and the blue/yellow/brown are joint as one and the gray make another wire. So that makes a pos and a neg
The Right(blown) is hooked up just the same. connencting the red/yellow/gray and the red/yellow/blue as one and the brown/white as another.

right side
1)red/yellow/gray
2)red/yellow/blue combind 1&2 as one
3)brown/white

left side
1)blue/yellow/gray
2)blue/yellow/brown combind 1&2 as one
3)gray

PLease help me?