Originally posted by str8edgexx
I"m not sure about the GSR bar, but for the Si, you dont' need a beaks kit. Its not thick enough to warrant it. The GSR is probably not much thicker, and might not require one, but I'm not sure (someone confirm/deny this please). Anyway, if you're looking to buy one, check ebay, and keep an eye on the 4 sale section of this message board or any of the other ones. I got mine off a guy on HT. Also check with any junkyards around you. Whatever you do, don't go and get it at Honda. The entire setup costs around $210 at Honda...I got mine for $80, and I've heard some people getting them for as low as $50. Just keep your eyes open and be patient, and you'll find one. The GSR set up is gonna cost you more b/c you are gonna have to buy Si endlinks for it since integra ones won't work. If you have to get them new, be prepared to shell out like $55 a piece for each endlink. If you have a ton of money, go with this route since the bar is a little thicker from what I've heard, but if you don't want to spend a ton, just pick yourself up and Si one.
humm... thanks for the info... i'll keep that in mind... cuz i am debating between the gsr sway bar with beak kit vs. comptech sway with lower tie. i know price wise comptech is a lot more expensive, but i've also heard that comptech may have some issues with rattling sound when used on a greddy evo exhaust. so can anyone confirm this?