Ok, I have a 95 Civic EX Sedan, 1.6L, will find the engine code later today.

Anyhow, how hard is it to replace the front and rear main seals? I know I'll have to remove the exhaust manifold and oil pan. The car has 140k miles on it, and I had the timing belt, other belts and water pump replaced at 90k, and the receipt says they replaced the front main seal.

The problem I have is a small oil leak, and when I investigated, I discovered oil on both ends of the pan. I was told it COULD be just a loose oil pan, but being in networking, when I see a problem, I ALWAYS expect the worse, and that's what I usually get....the worse.

Anyway, nice site here, lots of good information.