Ok, so i put the ITR throttle bracket on, and i got the opposite of the results i was expecting, maybe i didnt do it right but heres what happened. i couldnt get the cable tight at all because the bracket itself is about half the size of the stock one, this resulted in my car idling at about 500rpm's and me having to push the gas almost to the floor to get any throttle feed back. After this i put on this stock one again and fooled around with it for a while and managed to get it pretty tight, only to result in a rough idle going from 1400-1700rpms in a pulsating manner when my foot was off the gas. I should have probably mentioned that i also have an after market throttle body, the edlebrock 65mm. Let me know what you think i should try next.